Skip to content
Screen Pulse Help Center

Amazon Signage Stick troubleshooting

Fix the most common Signage Stick setup problems, from Wi-Fi and remote pairing to a stick that doesn't show Screen Pulse.

Updated 4 min read

On this page
  1. The stick can't connect to Wi-Fi
  2. Change the stick's Wi-Fi network
  3. The display is stuck on the 'press to start' screen
  4. The remote won't pair
  5. The stick says it's bound to another organization
  6. Screen Pulse doesn't appear on the display
  7. Reset the stick to start over
  8. The player shows 'Sorry, can't obtain pairing code'
  9. The screen shows Offline after pairing
  10. Still stuck?

Most Signage Stick problems happen during setup: the stick can't join Wi-Fi, the remote won't pair, or the stick belongs to another Amazon account. Find your problem below. Amazon's troubleshooting guide has the full details, and Amazon's support team handles problems with the stick itself.

The stick can't connect to Wi-Fi

The stick supports Wi-Fi 6E on the 2.4, 5 and 6 GHz bands; see Amazon's Wi-Fi bands FAQ. If it can't connect:

  1. Go back and refresh the list of networks.
  2. Restart the stick: unplug its power for a minute, then plug it back in.
  3. Restart your router, and move the stick closer to it if you can.
  4. Check the network's security. Setup with the remote supports WEP, WPA/WPA2-Personal, WPA3-Personal and Enhanced Open. For enterprise Wi-Fi, which asks each person for a username and password, set the stick up with the Amazon Signage app and tap Enterprise Wi-Fi? on the password screen.
  5. Still no luck? Use a wired connection with an Ethernet adapter. Power the adapter from the stick's own power cable, not from a USB port on the TV, which doesn't give it enough power.

Change the stick's Wi-Fi network

To move a stick that's already set up to another Wi-Fi network, use its remote:

  1. Press Settings on the remote.
  2. Choose Network & Internet, then Wi-Fi.
  3. Choose the network and enter its password.

Network not in the list, or it won't connect? Turn Wi-Fi off and on again, or forget the network and connect again. Amazon's Wi-Fi settings guide has more detail.

The display is stuck on the "press to start" screen

The stick is waiting to be set up. Either set it up from your phone with the Amazon Signage app, or hold Home on the remote for about 10 seconds and follow the steps on the display. See Set up with the Amazon Signage app or Set up with the web console.

The remote won't pair

  • Hold Home for 10 seconds or more, until the light on the remote flashes amber.
  • If that doesn't work, hold Back and Fast Forward together for 3 seconds, then press Play.
  • Set the stick up with the Amazon Signage app? Add the remote from the stick's settings with Add physical remote. Meanwhile, the app's virtual remote works.

The stick says it's bound to another organization

The stick is still registered to another Amazon account, for example the reseller's or a previous owner's. Whoever registered it can remove it at console.signage.amazon.com. If you can't reach them, email Amazon at signage-support@amazon.com with the stick's serial number, and they'll release it.

Screen Pulse doesn't appear on the display

  • The install takes 5 to 10 minutes after setup, and the stick may restart. Wait until it's done.
  • Another app chosen instead of Screen Pulse? A stick's content management system can't be changed after setup. Reset the stick and set it up again, choosing Screen Pulse.

Reset the stick to start over

A factory reset erases the stick's settings, so you can set it up again from the start, for example to choose Screen Pulse or move it to another organization. Use any of these:

  • In the Amazon Signage app: on the home screen, tap the stick's card to open its remote, then tap Reset. The stick then shows as Offline in the app.
  • In the web console: at console.signage.amazon.com, open the ⋮ menu on the stick's row and choose Factory reset.
  • With the remote: press Settings, then choose System → Reset options → Erase all data (factory reset). Or hold Back and the right side of the navigation ring together for 10 seconds.

Then set the stick up again, with the Amazon Signage app or the web console. Amazon's device management guide has more detail.

The player shows "Sorry, can't obtain pairing code"

Screen Pulse started, but the stick can't reach our servers. Check that the network allows Screen Pulse; see Network requirements. Then restart the player by unplugging the stick for a minute.

The screen shows Offline after pairing

The stick has lost its connection. See My screen shows Offline.

Still stuck?

  • For the stick itself (setup, Wi-Fi, the remote, registration): contact Amazon at signage-support@amazon.com, or see Amazon Signage support.
  • For Screen Pulse (pairing, content, the player): contact us through Support → Contact Support with the screen's name and a photo of the display.

Still need help?

Our support team can walk you through it.

Contact support

Type a question or a few words, such as "screen offline" or "import donors".